Fluid bed coaters used in the Wurster Process at Coating Place.

Research - Scale Up Unit; 4"/6", 6", 9" Unit

For research and scale-up work. Primarily for research and experimental use, it can be used for small scale production.

Capacity: Fluid Bed Coating is the science of suspending a particle on a controlled air stream and encapsulating it with a resin chosen to give the desired results.
To get the optimum outcome it is important to choose the right piece of equipment and to be sure that it fits the specific needs.

Unit Designation	Capacity in Liters
	Min.	Max.
4"/6"	0.60	1.7
6"	1	4
9"	3	10

The capacities listed above covers the ranges within which the different units work most satisfactory per batch. Though it is possible to coat both larger and smaller quantities than those listed above it is not recommended.

Features: Transparent Chamber
Emission Controls
Dehumidification
Hot Melt Systems
State of the Art Control; Computer / Manual Control (all units)

Suitable Particles and Coating Materials

The process is able to handle a large range of particles and to use a great variety of coating materials, allowing one to tailor coatings to specific requirements.

Particles	Coating Materials

Powders	Organic Solutions
Crystals	Aqueous Solutions
Granules	Latex Formations
Beads	Hot Melts
Capsules	Suspensions
Tablets
Irregular shapes