2"- 4"/6" Portable Unit (Portable Fluid Bed Coater)
2"- 4" Manual Research Unit w/ 2" insert (304 Stainless Steel Fluid Bed Coater)

Portable Unit; 2", 4"/6" Unit

For small research and development work.

Capacity

Fluid Bed Coating is the science of suspending a particle on a controlled air stream and encapsulating it with a resin chosen to give the desired results. To get the optimum outcome it is important to choose the right piece of equipment and to be sure that it fits the specific needs.

The capacities listed above covers the ranges within which the different units work most satisfactorily per batch. Though it is possible to coat both larger and smaller quantities than those listed above it is not recommended.

Parts or Auxiliary Equipment

2" Coating Chamber Assembly
4"/6" Coating Chamber Assembly
2" Screens
4" Screens
Acrylic Flange (each)
Acrylic Chamber - 2"
Acrylic Chamber - 4"/6"
Chiller System
Heated Nozzle Assembly (4" only)
Hot Melt System
Inlet Filter or Secondary Outlet Filter
Nozzle Assembly
Outlet Filter Media (each)
Plate 2"
Plate 4"/6"
Pump-Aqueous and Adapter
Solvent Pump and Adapter
Tie Rod Replacement
Tie Rod Wrench
Top Spray Chamber Assembly

Features

Transparent Chamber
Dehumidification
Emission Controls
Hot Melt Systems
Lift Table Design
State of the art Control; Computer / Manual Control (all units)

Suitable Particles and Coating Materials

The process is able to handle a large range of particles and to use a great variety of coating materials, allowing one to tailor coatings to specific requirements.