Single Nozzle Unit

This is the industrial work horse, which means it is the most commonly used unit for production. It is a highly efficient single nozzle coater.

Capacity

Fluid Bed Coating is the science of suspending a particle on a controlled air stream and encapsulating it with a resin chosen to give the desired results. To get the optimum outcome it is important to choose the right piece of equipment and to be sure that it fits the specific needs.

The capacities listed above covers the ranges within which the different units work most satisfactorily per batch. Though it is possible to coat both larger and smaller quantities than those listed above it is not recommended. \

Parts or Auxiliary Equipment

Additional Cart
Chamber - Acrylic, 12"/18" Replacement
Chamber - Acrylic, 18" Replacement
Dehumidification - Inlet Air System
Filter (Hepa) - Inlet or Secondary Outlet Filter
Filter - Outlet, Replacement (each, 16 required)
Heater Face / Bypass System
High Temperature Blower/Unit (over 300öF=150öC)
Monitor - LEL
Nozzle Replacement
Nozzle Assembly - Heated
Plate, 18" Replacement
Pump - Aqueous with Adapter
Pumping System - Hot Melt
(does not include melting tank)
Screen - 18" , Replacement
Unit Construction of 316 L Stainless Steel

Features

Transparent Chamber
Emission Controls
Dehumidification
Hot Melt Systems
State of the art Control; Computer / Manual Control (all units)

Suitable Particles and Coating Materials

The process is able to handle a large range of particles and to use a great variety of coating materials, allowing one to tailor coatings to specific requirements.

Process / Equipment / Manufacturing / Research / Facility / Information / Site Map / Profile / Main / Employment